Publicidad
Idiomas disponibles
Idiomas disponibles
Functioning
calling and conversation
When a call is received from the entrance panel, the monitor starts ringing for a maximum of 30 seconds. As standard,
it performs 4 rings with intervals of 4 seconds between each of them.
During the call period the image appears on the screen, the user can open directly, pressing the button
up the handset to establish conversation. The conversation has a maximum of 90 seconds. If you want to continue with
the conversation, press the button
self-starting
By pressing the button
the case of more than one is present in the installation.
With each press the system will automatically switch to the next device, showing the image and allowing the opening
of it by pressing the button
calling to concierge
If the monitor is in standby, handset is picked up and the button
unit. If the system does not have a concierge unit installed, the monitor will emit an error beep.
adjust of the calling volume
To adjust the volume of the call, insert a clip or similar through the indicated hole and press with it lightly.
The monitor has two volume levels (MEDIUM and HIGH)
melody selection
To select a ring tone, you have to pick up the handset and press the hang switch with your finger. With it pressed, a clip
or similar must be inserted in the indicated hole and press with it lightly.
Each press selects a different melody from 8 ones available.
ding dong function
The monitor allows to replace the interior bell of the house, this integrates the two calls (outside panel and house bell)
in a single device. These calls will be differentiated with different melodies and flashes automatically. In order to have
this function, you only have to connect the button of the house bell to the monitor.
cctv surveillance function
The monitor allows the control of panels and CCTV cameras automatically. Each press on the button
different device. To do this, each CCTV camera must be installed with an Auta digital interface.
external functions
The monitor has 2 independent push-buttons that allow auxiliary functions, such as garage doors, lights, irrigation,
etc ...
To do this, an Auta auxiliary relay must be connected to the control circuit we want to control.
the user can establish communication with the PANEL / CCTV CAMERA that he wishes in
is pressed, a call will be made to the concierge
Bringing people together
EN
, or pick
activates a
Publicidad
