AEG MC 4447 iP Instrucciones De Servicio página 30

Sistema de altavoz inalámbrico para iphone/ipod
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGLISH
30
NOTE:
• The duration of the charging process depends on
the operation status and the remaining charge of
the battery. We recommend that you switch off the
speakers while charging.
• When the speakers are operated on the base station,
the volume automatically is reduced to approxi-
mately 80% to enable charging.
Cleaning
• Before cleaning disconnect from mains power supply.
• Clean the device with a soft damp cloth without
detergents.
• Do not submerge the device in water.
Trouble shooting
Problem
Cause
The unit cannot
The unit is blocked
be operated
and "hangs"
The power indica-
No power supply Check if the AC
tion (base station)
does not light
No sound
A 3.5 mm jack
plug has been
inserted into the
AUX jack (13)
In case of iPod/
iPhone playback:
The iPod/iPhone
is not connected
correctly to the
dock
In case of PC
music playback:
"SYNIC Wireless
Audio" was not
selected as the
standard playback
device in the
Control Panel of
the PC
The speakers are
switched off
Problem
No sound
Solution
Pull the mains
plug for approxi-
The remote
mately 5 seconds.
control does not
Then connect the
function
unit again
adapter is con-
nected correctly
to the wall outlet
and the DC IN
jack (12)
Check the wall
outlet with a
different device
for functionality
Remove the jack
plug from the
Distorted sound
AUX jack
Check for correct
connection of the
iPod/iPhone to
the dock
Select "SYNIC
Wireless Audio" as
the standard play-
back device in the
Control Panel ï
"Play music from
the PC"
Switch on the
speakers
Cause
Solution
The speakers are
Connect the
not connected
speakers to the
with the transmit-
audio transmitter
ter
ï "Connection of
audio transmitter
and speakers"
The built-in
Charge the built-
batteries of the
in batteries of the
speakers are
speakers ï "Char-
exhausted
ging the built-in
batteries of the
speakers"
Too large distance
Move the speakers
between speakers
to within range of
and audio trans-
the transmitter
mitter
Volume too low
Increase the vo-
lume at the base
station and/or at
the speakers
Distance too large Make sure that
the remote con-
trol is within 8 m
from the unit
Battery
Replace the batte-
discharged
ry of the remote
control ï "Insert/
Replace Battery in
Remote Control"
In case of iPod/
Check for correct
iPhone playback:
connection of the
The iPod/iPhone
iPod/iPhone to
is not connected
the dock
correctly to the
dock
Too high volume Reduce the
volume
The sound source
Select a different
is distorted
music file with
good quality
Set the playback
of the external
unit to an audible
volume
Change the
equalizer settings
of the playback
source

Publicidad

Tabla de contenido
loading

Tabla de contenido