Turning Off - Enders NOVA LED L Serie Manual De Montaje Y Uso

NOVA LED L | NOVA LED M
LED AMBIANCE LIGHT
SAFETY NOTES
!
Make sure that the live parts do not get wet.
Only use commercially
3 x 1.5V LR 14 in good condition.
The LED light can be switched on and off via a
pushbutton (E)
SWITCHING ON THE FIRE PIT
1. Set the gas regulator to the „OFF" position.
2. Open the cylinder valve or the valve on the gas
pressure regulator.
3. Push in the regulator and turn anti-clockwise to
ignite.
4. When the gas ignites, hold the gas regulator for
approx. 30 seconds, then adjust to the desired
flame height. If the burner does not ignite, wait five
minutes and repeat steps 2 and 3.
EXPLANATION OF SYMBOLS ON THE
FIRE PIT
LED-
ambiance light
top
LED-
ambiance light
bottom
Item no.: 5600 | 5601 | 5602 | 5603 | 5604 | 5605 | 5606 | 5607
approved batteries

TURNING OFF

1. To switch of the device, close the regulator valve.
29
HI
Low
Ignition and regulator
button (G)