Texi Pierrot Manual De Operación página 114

TEXI Pierrot operation manual
How to thread the lower looper
How to use the thread automatic lower looper threader
See the figure and thread the lower looper
as indicated (1) – (7).
1. Pull out the thread from the thread
spool. Thread the guide hole of
the thread tree from back to front.
2. Correctly thread the thread guide (1).
3. Lead the thread into the groove and let
the thread pass the tension disc of
the tension adjustment dial (2).
4. Thread the looper area of machine
following the blue color coded thread
guides (3) to (7).
1. Draw the thread through the lower looper (4).
2. Slide thread behind finger of thread guide slide (3).
3. Push up the lower looper threading lever (5) to the
highest position, until the end of the slide is level with
the blue mark.
4. Release the lower looper threading lever (5)
and then draw the thread out from back to the foot.
Do not allow threads to cross. Take lower looper
thread under that of upper looper.
(3) Thread guide slide
(4) Lower looper
(5) Lower looper threading lever
112