Installing The Battery - AB Quality MobileView T750 Inicio Rápido

Installing the Battery

1. Slide the battery into the battery
compartment until the battery cover plate is
flush with the Tablet case, then slide the
cover plate up. You should feel the battery
snap into place.
ATTENTION
2. To close the battery compartment, gently slide
the battery cover-plate up.
Startup/Power On
Press the ENTER button to turn the MobileView Tablet
ON.
If the battery level is sufficient enough, the following
power-up screen should appear.
If power-up screen does not appear, connect the MobileView Tablet to the ac
adapter/charger to operate on ac power and charge the battery.
Install only the battery supplied with your MobileView Tablet.
Use of any other battery could result in a hazard to the
operator and damage to equipment.
MobileView™ Tablet T750
Publication 2727-QS005B-MU-P
5