Assembly - Relaxxnow VTX450 Manual Del Usuario

6. ASSEMBLY

• Remove the packaging completely from the device.
• Unwind the power cord completely.
• Be careful not to damage the power cord.
• Firmly tighten all component parts and pre-assembled parts!
Put the two halves of the stand together.
Make sure the pins on the bottom of one
half are aligned with the side eyelets on the
other half. A clear click is heard when the
two components snap into place.
Put the stand on the underside of the fan
tower over the thread. Then screw the nut
clockwise onto the thread and clamp the
stand.
BE CAREFUL NOT TO PINCH TRAP THE
CABLE!
At the top of the stand there is a recess
facility for you put the cable to avoid
catching the cable between the stand and
the underside of the tower stand.
RELA NOW 27