Kohler K-3007 Guia De Instalacion página 7

Determine the Bracket Location (cont.)
Your furniture, countertops, and lavatories are designed to be
functional and attractive as well as adaptive to your room and wall
space. Your furniture components can be arranged into endless
combinations to complement your style. Identify your configuration to
determine the required quantity and required location of the brackets.
IMPORTANT! The threaded inserts in the bottom of the countertop
must align with the corresponding holes on the top of the brackets.
It is critical to align the mounting hole of each bracket against the
wall at one, two, or three of the following locations depending on
the configuration selected.
For 24" (61 cm) countertops: 4" (10.2 cm) in from each end of the
countertop length.
For 48" (121.9 cm) left or right cut-out countertops: 4" (10.2 cm) in
from each end of the countertop length and 24" (61 cm) center.
For 48" (121.9 cm) center cut-out countertops: 4" (10.2 cm) in from
each end of the countertop length.
For 72" (182.9 cm) countertops: 4" (10.2 cm) in from each end of the
countertop length and 25-1/2" (64.8 cm) in from each end of the
countertop length.
To properly install the brackets, proceed to the section that applies to
your countertop length.
If brackets are not required for your installation, proceed to the "Install
the Components and the Countertop" section of this guide.
Kohler Co. 7 1012594-2-C