Wallplate Output Connections - ATON HDR44 Manual Del Usuario

HDR44 4x4 High Defi nition Video Router
Wall Plate Connections
A R44WP HD Receive Wall Plate is required to connect video, audio, and IR to a zone. The
R44WP wall plate has component video, audio, and IR connections that connect to the Video
and Audio inputs of each zone's HD Video Display. A run of (2) two Cat-5 Cables terminated to
T-568A standard, shown in Figure 3-11, is required between the HDR44 and the location des-
ignated for the R44WP. Connections between a source component and the HDR44 are detailed
in Figure 3-6 through Figure 3-9,while connections between the R44WP and the zone HD Video
Display are detailed in Figure 3-12.
R44WP
RJ45 Cable
RJ45 Cable
HDR44
Figure 3-10: Wall Plate Connections
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Shown tab
down
Figure 3-11: T568A Wiring Standard
16 ©2008 • All rights reserved.