Battery Installation; Mode Selection - smartheart 19-103 Manual De Instrucciones

BATTERY INSTALLATION

This unit includes 3 AAA batteries.
It is necessary to replace the batteries when the display does not turn
on when being activated by stepping on the scale.
The battery compartment is located on the underside of this scale.
1. Depress the clip on the battery compartment cover and remove.
2. Insert or replace 3 AAA batteries into the battery compartment,
following the indicated polarity. Always use new batteries.
3. When batteries are first installed, device will default to English
audio announcements in Lbs.
4. Replace the battery cover.
5. Dispose of batteries according to local disposal and recycling
regulations.
It is recommended to remove the batteries if the unit will not be used
for an extended period of time.
MODE SELECTION–POUND (LB), KILOGRAM (KG), TALKING
This scale will automatically default to pound (LB) unit
of measure and audible English language.
1. The scale must be ON/Active to change modes.
2. To change the unit of measure mode, press and release the
UNIT button on the back side of the monitor.
3. The display will alternate between 'lb' 'kg' with and without
audio annoucements.
• Lbs, English audio ON
• Kg, English audio ON
• Kg, Spanish audio ON
• Lbs, NO audio
• Kg, NO audio
4. When the desired unit of measure is active, release the button. The unit of measure
mode is now set.
6 • ENGLISH
MODE/
UNIT
Button