i-tec U3HUB742 Manual De Instrucciones página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 16
EN
Quick Start / USB 3.0 Charging HUB 7 Port
INTRODUCTION
The HUB is an ideal companion for everybody who does not have enough
USB ports in his/her notebook, ultrabook or PC and who has to constantly
connect and disconnect his/her favorite USB equipment such as flash
disks, mobile phones, tablets, digital cameras, MP3 players, printers, etc.
This HUB offers 7 USB 3.0 ports with the Plug & Play function and standard
USB charging – the HUB will automatically detect connected equipment for
USB charging. The two ports placed next to the LED also supports charging
according to specification BC 1.2, e.g. for the iPads or Samsung tablets.
The USB 3.0 interface is important mainly for data transfers from USB 3.0
memory cards and flash disks which will use its high transfer speed most.
The advantage is included external power adapter which you can use for
backing up data on external hard drives or for connecting high power
consumption devices which are powered directly from the USB port.
This HUB does not require installation of drivers. You will just connect it by
the USB cable to your computer and immediately you can start using it. This
HUB has a built in overcurrent protection of your computer in case of short
connection on the peripheries. The interface is compatible with USB 2.0 / 1.1.
INSTALLATION IN WINDOWS XP / VISTA / 7 / 8 / 8.1 / 10 AND HIGHER,
MACOS X AND HIGHER, LINUX
The HUB is installed automatically, no need install drivers. Connect the
connector of the power adaptor to the HUB and connect the power adaptor
to a socket outlet with 230V. Then plug the HUB via USB cable into available
USB port (USB 3.0, 2.0 or 1.1 standard) of your notebook / PC and follow the
on-screen instructions. The HUB will be installed and displayed in Device
manager as "Generic USB Hub" and "Generic USB SuperSpeed Hub". Using
of 7 port HUB is possible only with power adapter.
CHARGING
You can use external power adapter, if you connect printer, scanner or other
high power consumption devices to USB ports in HUB (power adapter is
included). Respect the basic rules while using this power adapter (for ex.
do not let in reach of children, if the adapter is in 230 V circuit, do not put it
into the water and so on).
CHARGING
The HUB supports charging of the connected USB mobile equipment such
as smartphones (including iPhone and Samsung phones), e-book readers,
multi-media players, GPS navigators, and tablets (e.g., Asus, Toshiba,
GoClever, Prestigio, Emgeton, Sencor). Using the original cable connect the
equipment to be charged to the USB port of the HUB. At the same time the
power adaptor needs to be connected to the HUB as well. Charging of iPads
or Samsung tablets is possible only through two USB ports placed next LED.
8

Publicidad

Tabla de contenido
loading

Tabla de contenido