Care And Maintenance; Troubleshooting; Corrective Action; Warranty - Kobalt KWL 0080-06 Manual Del Usuario

CARE AND MAINTENANCE

Cleaning
Before cleaning or performing any maintenance, remove the battery or extension cord from the work
light. For safe and proper operation, always keep the tool and its ventilation slots clean.
Always use only a soft, dry cloth to clean the plastic transparent cover, never use detergent or
alcohol. Always wear safety goggles when cleaning tools with compressed air.

TROUBLESHOOTING

If you still have questions or an unresolved issue after going through this troubleshooting guide, or
just want to speak to a Kobalt product expert, please call our Kobalt customer service department at
1-888-356-2258.
PROBLEM
The work light does
not work.

WARRANTY

5 - YEAR LIMITED WARRANTY
8
(5) years subject to the warranty coverage described herein.
This 80V Sitting Worklight is warranted for the original user to be free from defects in material and
workmanship.
period, simply return the Sitting Worklight along with proof of purchase to the place of purchase for a
free replacement or refund, or call 1-888-356-2258 for warranty service.
This warranty is void if: defects in materials or workmanship or damages result from repairs or
alterations which have been made or attempted by others or the unauthorized use of nonconforming
parts; the damage is due to normal wear, damage is due to abuse (including overloading of the tool
beyond capacity), improper maintenance, neglect or accident; or the damage is due to the use of the
tool after partial failure or use with improper accessories or unauthorized repair or alteration.
state.
POSSIBLE CAUSE
1. Low battery charge.
2. The plug is not connected to
the power source.
3. The light has stopped
working to protect
internal circuits.
8

CORRECTIVE ACTION

1. Charge the battery.
2. Connect the plug to the power source.
3. Turn off the light, wait for the tool
and battery to cool down, then
start the tool again.
10
state to