Breguet 5717 Instrucciones De Uso página 8

Starting the watch
Crown I in position 1. This position
enables manual winding of the auto-
matic movement by rotating the crown
upwards ( ) about 40-45 turns.
Afterwards, when worn on the wrist,
the watch is rewound automatically.
When it is not worn, the fully wound
watch will run for about 55 hours.
Setting the time
First, pull the crown-pushbutton II
into position 2. Then turn it in either
direction until the window at 6 o'clock
(A) displays the city you are in or the
city you have chosen (or, failing that,
the city representing the time zone
you are in or the time zone you have
chosen). Then push the crown-push-
button back into position 1.
Pull the crown I out to position 3 to
stop the seconds hand when it reach-
es 12 o'clock. This enables precise
time-setting. Then turn the crown
upwards ( ) to advance the hands
until the date changes at midnight.
Continue advancing the hands to set
the watch to the time in the zone of
the displayed city. For accurate time-
setting, ensure that the last operation
is done with the hands moving clock-
wise. Then push the crown back to
position 1 starting the seconds hand-
precisely, and rotate it downwards
( ) to make sure it turns freely.
M
Rapid date setting
Pull the crown I out to position 2.
Turn the crown upwards ( ) to move
forwards to the desired date, or down-
wards ( ) to move backwards to the
M
desired date. Then push the crown
back to position 1.
English