MILLASUR BALIZA V16 Instrucciones Y Manual Usuario página 19

Technical specifications
Colour
Lamp type
Activation
Ingress protection
Wind resistance
Use
In case of breakdown or accident, place the V16 beacon on the roof of the car or in a visible high place such as, in the case of a
motorcycle, the fuel tank. In this way, you will quickly alert that there is an obstacle in the way. Always keep the device within
reach, in the glove compartment of your car or in your motorcycle bag. Place the device in position for use before exiting the car,
as high as possible for further viewing.
Before using the device for the first time, pull the safety tab so that the 3 AAA batteries (included) come into contact with the
device and provide power.
Intermittent beacon mode
Turn on the flashing beacon: press the flashing beacon button once.
Turn off the flashing beacon: Press the flashing beacon button one more time.
Flashlight mode
Flashlight mode has two intensities of white light.
Turn on the flashlight: press the flashlight button once.
Decrease the flashlight intensity: press the flashlight button again.
Turn off the flashlight: press the flashlight button once.
Security
• This product is not designed to be used by children or people people, or those who lack experience or knowledge, unless
they have had supervision or instructions on the use of the product by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the device
* This product is equipped with a magnetic base with high inductive capacity. Be careful not to bring it close to emitting or
receiving sources sensitive to magnetic radiation.
• People with pacemakers should consult a physician before using this product. They must remain at least 50 cmproduct
because electromagnetic waves can affect pacemaker functions
• Accidental ingestion of the magnetic base can cause serious injury. If the device breaks, dispose of all its parts in aclean
area
• This device is powered by 3 AAA alkaline batteries (included). When replacing the batteries, check that the type and
voltage arecorrect
• This device is protected against polarity reversal.
• Check the battery status periodically. Replace them whennoticeable decrease in light intensity
• Do not try to disassemble the device as this will make it unusable
Disposal of electronic and electrical devices
• This symbol indicates that electrical and electronic equipment are to be chosen separately.
• This product is designed for separate collection at an appropriate collection point. Do not dispose of it as household
waste.
• If the equipment uses batteries, they must be removed equipment and are disposed of at a suitable collection center. If
BEACON V16
Yellow Power
High intensity LED Battery stability
Manual induction Operating temperature
IP54 (rain and dust) Visibility
+ 180Pa Frequency
INSTRUCTIONS FOR USE
3 AAA alkaline batteries
18 months
-10 ° C / + 50 ° C
360 degrees horizontal, +/- 8 vertical
Between 0.8 and 2 Hz
3