Publicidad
Idiomas disponibles
Idiomas disponibles
Instructions for use
®
Arti-Spot
High-Spot Indicator
BK 85, BK 86, BK 87
Application
®
Arti-Spot
is used in accordance with normal practice hygiene.
•
Color application (and start of application)
®
Apply Arti-Spot
sparingly with a brush to the surface to be tested.
•
Let the paint dry for approx. 10 seconds.
•
Subsequently insert the part to be tested (crown, bridge, abutment of implants, etc.). The color skin is de-
•
stroyed at the point of contact and the contact point is thus visible.
Do not reuse the application brush, to avoid transmission of germs!
•
After adjustment remove excessive color.
•
Effect/Diagnosis
After insertion of the surface to be tested into the oral cavity, interferences can be detected on the occlusal sur-
faces. The color skin is being destroyed on these occlusal surfaces. The base material then shines clearly
through and highspots can easily be detected.
Reusability
It is not permitted to reuse Single Use items (single use application brush). Safe use cannot be guaranteed
•
if these products are used again, since there is an infection risk and / or the safety of the products is not lia-
ble.
The use of damaged or soiled instruments is the responsibility of the user.
•
In case of non-compliance, all liability is excluded.
•
Disposal instructions
®
Arti-Spot
can be disposed of with the usual practice waste.
Notification of incidents
Serious adverse events occurring in connection with the product must be reported to the manufacturer and the
competent authority of the Member State.
Symbols
Manufacturer
Expiry date
„Follow manufacturer's instructions"
Reference number
Batch code
Unique Device Identifier
PRI_IFU_BK85-87_EN_003_200327.docx
Seite 2 von 3
Publicidad
