Holiday living 298-141436050-1-LED Manual De Instrucciones página 5

USER SERVICING INSTRUCTIONS
REPLACING FUSES FROM FUSE HOLDER:
1) Grasp plug and remove from the receptacle or other outlet
device. Do not unplug by pulling on cord.
2) Open fuse cover. Slide open fuse access cover on top of
attachment plug toward blades.
3) Remove fuse carefully.
4) Risk of fire. Replace fuse only with 3 Amp, 125 volt fuse
(provided with product).
5) Close fuse cover. Slide closed the fuse access cover on top of attachment plug.
6) Risk of fire. Do not replace attachment plug. Do not remove the safety device (fuse).
Discard product if the attachment plug is damaged.
REPLACING LAMPS FROM LAMP HOLDERS
1) Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.
2) Unlock the burned out LED lamp by lifting the hook and pull lamp and plastic base straight out of lamp
holder as shown in Fig. 1.
3) Insert the spare LED lamp into the lamp holder in correct direction and lock the hook of lamp base by
pushing lock down into the tab as shown in Fig. 2.
4) Replace lamp with only 3.4 volt, 0.068 watt LED type lamps provided with this product.
CAUTION:
a) Do not exchange the lamp base on the new lamp with the old one or the LED wires may break.
b) Pull lamp and plastic base straight out of lamp holder.
c) Do not deliberately change the direction of the LED lamp in the lamp holder (always match
the hook to the tab, see Fig. 2).
CAUTION:
a) Risk of fire. This product does not contain lamp shunts, which allow the product to operate if one
lamp burns out. Do not replace lamps with other than the spare lamps provided with this product.
b) Replace lamps only with 3.4 volt, 0.068 watt spare lamps provided with this product.
5
5