Wall Mounting The Adapter; To Mount The Adapter - Bose SoundTouch LIFESTYLE 135/235 II Guia Del Usuario

Wall mounting the adapter

You can mount the adapter on a wall (hardware not included).
See "Mounting hardware specifications" for the correct hardware.
If the mounting hardware instructions differ from these instructions,
follow the mounting hardware instructions.
There are two ways to mount the adapter:
• Vertically; connector panel facing left
• Horizontally; connector panel facing up

To mount the adapter

1. Drill two holes 6¼ in. (159 mm) center-to-center.
2. Insert plastic wall anchors (if mounting to wallboard).
3. Install pan-head wood screws.
Note: Leave the screw heads ¼ in. (6.35 mm) above wall
surface.
4. Position adapter onto the screws.
Mounting hardware specifications
Item
Wall thickness
Drill bit
Pan-head wood screws
(2)
Plastic wall anchors (2)
10 - English
6¼ in. (159 mm)
center-to-center
Wood
1 in. (25.4 mm) or thicker
⅛ in. (3.17 mm)
#8x1¼ in. (32 mm)
Not used
Wallboard
⅜
in. (9.5 mm) or thicker
³
/
in. (4.76 mm)
16
#8x1¼ in. (32 mm)
#6-8x1 in. (25.4 mm)