User Settings - AOKE WP-H01 Manual De Usuario

User settings

The user can choose to change the desk's default settings. In total there are
6 settings that can be changed. These are numbered in the following order S-
1 to S-6.
You can change the settings by pressing «M» for 5 seconds. Then select
which setting you want to change, using «↑» and «↓». Then press «M» again
to select the selected user setting. Select the desired setting and confirm it by
pressing «M».
S1) CM or INCH
1. Press «M» for 5 seconds;
2. Then "S-01" flashes on the display;
3. Press «M» again;
4. Then use «↑» or «↓» to select 1 or 0; ( 0 = CM & 1 = INCH )
5. To save, press «M» again.
S2) Adjust anti-collision sensor sensitivity
0: means off, 1: is the least sensitive and 8: is the most sensitive.
S3) Sensitivity upstream anti-collision sensor
0: means off, 1: is the least sensitive and 8: is the most sensitive.
S4) Sensitivity downward anti-collision sensor
0: means off, 1: is the least sensitive and 8: is the most sensitive.
S5) Determine the minimum height display (standard 65 cm)
Select the minimum height that will be showed on the display.
S6) Determine automatic or manual operation of memory buttons
0: means manual placement (press and hold the button);
1: means automatic placement to the selected height.
Caution:
- This product must comply with the technical parameters (see label control box);
- Keep the product away from water and corrosion-resistant gas;
- Is there a problem with the product? Please contact the point of sale.