Assembly Steps - Costco Winston Instrucciones De Ensamblaje

Assembly Steps:

Step 1:
Place the leg(B) and leg connector(C) on a soft, flat and non-abrasive surface.
a.
Attached the legs(B) to the leg connector (C) using hex bolt (E) and M6 washers((F).
b.
Do not fully tighten the hex bolts until assembly is complete
c.
Step 2:
a. Attached the table top (A) to the finished frame using hex bolt (D) and M6 washers(F).
b. Tighten all the hex bolt(D) with wrench(G)
c. Attached M6 bolts caps (H)
B
Figure 1
F
E
H
C
3