Safety Precautions; Cleaning And Maintenance - Action Activejet KS-1065BPJ Manual De Instrucciones Y Condiciones De Garantía

GB
Air Cooler Activejet Selected KS-1065BPJ
ATTENTION:
Please read the Operating Manual before using the device. We recommend saving this manual for future reference.
When the device is in operation, it is recommended that you follow basic safety precautions in order to prevent fire, electric shock, or injuries.
Adhering to the guidelines and recommendations contained within this Operating Manual helps to extend the device life.

SAFETY PRECAUTIONS:

1. Do not attempt to repair the device by yourself.
2. Keep the working area clean and tidy.
3. Keep the device away from moisture and water, explosives, flammable substances, and dust. Failing to adhere to the above rules creates a risk
of fire or injury. Significant levels of dust may lead to engine overheating and permanent device damage.
4. The use of adapters and cables with non-original plugs is forbidden.
5. Keep the power supply cable in good condition: do not use it to transport the device, pull it, or remove the plug from the socket.
Protect the cable against heat, mechanical damage, oil.
6. Do not insert fingers or any other objects in the air inlet/outlet grille.
7. This device is not intended for use by persons with restricted physical, sensory, or mental abilities. Such persons and children above the age
of 8 may use this device only when supervised by a person responsible for their safety.
8. Do not cover the device, for instance with clothes.
9. Make sure that power supply is compatible with the voltage defined for this device (220- 240V ~ / 50-60 Hz).
10. Always remove the plug from the socket before installing the device, disassembling it, and performing maintenance.
11. Do not leave the device unattended when it is switched on.
12. The device is intended for household use in clean, dust-free rooms. The device should be placed on a hard, flat surface, with 1m of free space
between it and other objects such as heaters, other electrical devices, furniture, or curtains.
TECHNICAL DATA AND PARAMERTERS:
Model: KS-1065BPJ
Voltage and frequency: 220V-240V,50Hz-60Hz
Protection class: II
Power: 65W
Weight: ~8,6 kg
FIRST USE:
1. Open the packaging and take the device out.
2. Check if the device is complete and free from damage.
3. Fill the container with water to a level above the MIN designation, but below the MAX symbol. We recommend distilled water or water filtered
in the reverse osmosis process. The device must be unplugged during refilling.
4. The set contains 2 ice packs. After filling the containers with water and cooling them in a freezer, place them in the chamber with a right
amount of water, so that it does not exceed the indicated MAX level. Using ice cubes is also allowed.
CONNECTION TO THE MAINS:
Make sure that the power supply is compatible with the voltage defined on the device and connect the device to a regulation-compliant
earthed socket.
USE:
Make sure that the air cooler is placed on a flat and even surface, away from other heat sources, at a suitable distance from curtains and other light
fabric that could be pulled in by the rushing air.
You can control the device using buttons on the upper control panel (fig. 1) or the remote controller (fig. 2). You can switch between control
with the panel and with the controller, depending on your needs. Functions are described in the table (fig. 3).
Fig. 2
If the air cooler is not used for an extended period of time, we recommend that you unplug it.
REMOTE CONTROLLER BATTERY REPLACEMENT:
The remote controller is powered by a CR2025 ( 3V ) battery, we recommend that you use
lithium-ion batteries.

CLEANING AND MAINTENANCE:

Remove the plug from the socket before cleaning the device. Clean the housing and other elements of the device with a clean, soft cloth, using
neutral detergents and warm water.
Air Cooler Activejet Selected KS-1065BPJ
On/off switch.
Speed adjustment ( SPEED ): medium, high, low.
Air supply mode adjustment ( MODE ): regular, natural, night.
Air swing on/off switch ( SWING ).
( TIMER ) This function enables you to set the device to switch off in 1 to 8h. Press
the TIMER button once to set the working time to 1h. Press the TIMER button twice
to set the working time to 2h.
Cooling button ( COOLER ).
Humidifying function button ( HUMIDIFY ). Pressing this button starts the water
pump and automatically sets the air speed to low.
Ionisation on/off switch ( ION ).
GB
Fig. 1
Fig. 3