Publicidad
Idiomas disponibles
Idiomas disponibles
Disposal of packaging materials
The packaging protects the appliance from damage during carriage.
The packaging materials have been selected for their environmental friendliness and
ease of disposal, and are therefore recyclable.
Returning the packaging to the materials cycle conserves raw materials and reduces
the amount of waste that is generated. Dispose of packaging materials that are no
longer needed in accordance with applicable local regulations.
NOTE
► If possible, keep the original packaging during the warranty period so that the
device can be properly packed for returning in the event of a warranty claim.
Scope Delivery
The appliance is supplied with the following components as standard:
-
1x Vacuum Sealer
-
1x Roll Vacuum Bag (28x300 cm)
► Check the package for completeness and for signs of visible damage.
Installation Requirements
For safe and trouble-free operation of the device, the set-up location must fulfill the
following requirements:
► When setting it up, place the appliance on a firm, flat and horizontal surface.
► Do not place the device in a hot, wet or extremely damp environment or in the
vicinity of flammable materials.
► The mains power socket must be easily accessible, so that the power cable can
be easily disconnected in the event of an emergency.
Electrical Connection
► Before you connect the appliance, compare the connection data (voltage and
frequency) on the data plate with that of your mains power network. These data
must agree so that no damage issue stained by the device.
► Ensure that the power cable is undamaged and is not routed over hot surfaces
and/or sharp edges.
► Ensure that the power cable is not taut or kinked.
► Do not let the power cable hang over edges (trip wire effect).
► Insert the plug into the mains power socket.
14
Publicidad
