Parts And Their Functions; Front Panel - Panasonic AG-CVF15G Instrucciones De Funcionamiento

Parts and their functions

Front panel

  
PEAKING CHROMA CONTRAST
B.LIGHT ZEBRA TALLY
HIGH ON HIGH
NOR OFF OFF
LOW LOW
MOMENT
  


1 PEAKING control
Adjusts the outlines of the images in the viewfinder to make focusing easier. The setting of this control
has no effect on the output signal of the camera. The amount of the adjustment is increased when the
control is rotated clockwise.
2 CHROMA control
Adjusts the chroma of the color for the image in the viewfinder. The setting of this control has no effect
on the output signal of the camera. The colors become darker when the control is rotated clockwise.
3 CONTRAST control
Adjusts the contrast of the screen inside the viewfinder. The setting of this control has no effect on the
output signal of the camera. The contrast becomes stronger when the control is rotated clockwise.
4 BRIGHT (Brightness) control
Adjusts the brightness of the screen inside the viewfinder. The setting of this control has no effect on
the output signal of the camera. The images become brighter when the control is rotated clockwise.
5 B.LIGHT switch
Adjusts the brightness of the LCD monitor backlight.
HIGH : The backlight is made brighter than normal.
NOR : The backlight is set to the normal brightness.
LOW : The backlight is made darker than normal.
6 ZEBRA switch
Displays a zebra pattern inside the viewfinder.
ON : Displays a zebra pattern.
OFF : No zebra pattern is displayed.
MOMENT : When the switch is set to MOMENT, the zebra pattern is displayed for about 5 seconds,
and then it is cleared.
The switch does not stay at the MOMENT position but returns instead to the OFF position
(because it is a spring-back switch.)
The details of the display, such as the type of zebra pattern, will differ depending on the camera used
with the viewfinder.
Refer to the instruction manual of the camera for details.
 

BRIGHT
   




E-6