Faucet Installation - BLACK&DECKER Price Pfister Bristol 48 Serie Manual Del Usuario

Thank you for purchasing this Price Pfister product. All Price Pfister products are carefully engineered, and factory tested to
provide long trouble-free use under normal conditions. This product is easy to install using basic tools and our easy to follow
illustrated instructions. If you have any questions regarding this product, call 1-800-Pfaucet (1-800-732-8238).
1 BEFORE PROCEEDING
WARNING: Read all the instructions completely before proceeding. Price Pfister
recommends calling a professional if you are uncertain about installing this product!
This product should be installed in accordance with all local and state plumbing and
building codes.
2
2 SHUT OFF WATER SUPPLY
Locate water supply inlets and shut off the water supply valves. These are usually found
under the sink or near the water meter. If you are replacing an existing faucet, remove
the old faucet from the sink and clean the sink surface thoroughly.
3
3 TOOLS RECOMMENDED
• Plumber's putty • Screwdriver
• Pliers • Flashlight
Your installation may require new supply lines and / or shut-off valves or other additional
tools.
4
E
D
4 CHECKING THE CONTENTS OF THE BOX
Upon opening the box, check to ensure that all of the following items are included.
A Faucet D Putty Plate
B Lift Rod E Pop-Up Assembly
C Wingnuts (2x)
If any of these items are missing, please contact Price Pfister Consumer Service at
1-800-Pfaucet (1-800-732-8238).
ENGLISH
• Adjustable wrench
• Cloth
A
B
C
2

FAUCET INSTALLATION

5
BOTTOM GROOVE
5 PUTTY PLATE ATTACHMENT
Following manufacturer's recommendations on use, apply plumber's putty into putty
groove in bottom of Putty Plate (5A). Install the Putty Plate over the three holes in
your sink.
6
6A
6C
6 FAUCET INSTALLATION
Insert Faucet Shanks (6A) through the end holes of the sink. Press Deck Plate (6B)
onto Putty Plate (6C).
5A
6B
6A