Fitting Advice - Blatchford P409049 Instrucciones De Uso

7 Fitting Advice

The instructions in this section are for practitioner use only.
Position as close as possible to the build line.
Note... This device is designed for use with sockets that are 5–6 mm thick at the distal end and are
manufactured using Blatchford socket formers.
Socket
Symptom
A recurring noise occurs between the socket
and the other interfacing components.
The adapter moves out of position.
5–6 mm
Solution
Ensure that the socket interface has been
correctly formed and is the correct thickness.
The alignment bolt must be tightened. Apply
Loctite and tighten to the correct torque
setting.
User must not use the device until adjusted,
repaired or replaced.
8
938090PK1/1-0121