nurse FÓRMULA 1 Instrucciones página 15

FÓRMULA 1
GB
Assembly instructions
1 To open the walker
Open the walker by raising the tray to the highest position. The secondary lock willengage automatically.
Push the primary lockto a closed position to secure the mechanism.
Assembly of the wheels
2
Insert the wheels into the moulded socket in the direction indicated by the arrow. Then push firmly until
clicks into place.
Fitting the seat pad
3
Front of the seat.
Repeat the procedure of locking the plastic pins into the keyholes.
Warning! Always ensure the seatunit is correctly fitted prior to use.
4 Fitting the seat pad
Thread the 4 seat clips through the corresponding holes in the top tray. Once the clips have been thread
through the holes turn each of them 90 degress on the underside of the play. Please make sure each clip
is fully secured.
Attaching the toy tray
5
2xAA size Alkaline batteries are needed
for the toy (batteries no included). Unfold the walker and place the toy tray into position. Push the locking
keys located on the underside of the walker tray up and turn around to secure the toy tray to the walker.
The toy should be assembled by adult.
Attaching the rearview
6
Position the rearview into the top section.
Using moderate force push downwards until it locks in the top section.
Attaching the wheels
7
Position the wheels into the top section.
Using moderate force push downwards until it locks in the top section.
Attaching the Car Spoilers
8
Position the Car Spoilers into the top section.
Using moderate force push downwards until it locks in the top section.
9 To fold the frame
The locking mechanism is located on the underside of the top tray. Push the red safety catch up wards,
then the white release catch in wards. The tray can now be lowered into one of the three height positions
or fully folded for storage.
PRODUCT CARE:
Wipe all plastic/metal parts clean with a damp cloth using mild soap, dry thoroughly. Light soiling
of the seat pad can be removed with a damp cloth and a mid soap. Do not use strong detergents
or abrasive materials. Do not dry clean. Do not tumble dry. Line dry the seat pad. To maintain stop-
ping performance, clean friction strips regularly with damp cloth.
INSTRUCTIONS
15