Cisco Linksys WUSB300N Instalación Rápida página 62

Standard Channel - Select the
correct channel for your wireless
network. The channel you
choose should match the
channel set on the other
devices in your wireless network.
If you are unsure about which
channel to use, keep the
default setting Auto.
Click Next.
D
The Wireless Security screen will
appear.
If your wireless network doesn't
use wireless security, select
Disabled and then click Next.
Proceed to Step E.
Select the security method
used on your network: WEP , WPA
Personal, WPA2 Personal, or
RADIUS.
For WEP , WPA Personal, and
WPA2 Personal, proceed to the
appropriate instructions for your
security method.
For RADIUS, refer to the User
Guide (English only) on the CD-
ROM for instructions.
WEP
Select the WEP encryption level,
and enter a passphrase or WEP
key.
WEP - Select 64-bit or 128-bit.
8
Disabled
WEP stands for Wired
NOTE:
Equivalent Privacy, and WPA
stands for WiFi Protected
Access. RADIUS stands for
Remote Authentication Dial-In
User Service.
WEP