Usb Charging - tripplite U280-W02-A1C1 Guia De Inicio Rapido

Safety Instructions
• Be sure the electronic device(s) you are plugging into the unit conforms
to the specifications of this unit.
• The unit presents an electric shock hazard—do not open.
• The outlet used to power the unit should be easily accessible and
located near the equipment.
• Please refer to the marking label on the unit for input and output
ratings. Do not overload the power supply.
Note: The unit will be slightly heated when in use.
• If the unit stops working due to overcurrent, over temperature, or short
circuit, unplug the unit. Check to make sure the device plugged into the
unit is compatible with the unit's specifications.
• Use of this equipment in life support applications where failure of this
equipment can reasonably be expected to cause the failure of the life
support equipment or to significantly affect its safety or effectiveness is
not recommended.

USB Charging

To charge your USB device, simply connect the U280-W02-A1C1 to a
power source, then plug your device into the wall charger's USB-A and/
or USB-C port. Once your USB device is fully charged, unplug your device
and the U280-W02-A1C1 from the power source.
06-114-933847.indb 4
4
6/22/2018 3:32:10 P