Pairing The Projector To The Samsung Smart Remote; Installing Batteries Into The Samsung Smart Remote - Samsung The Premiere LSP7T Manual Del Usuario

Pairing the Projector to the Samsung Smart Remote

Installing batteries into the Samsung Smart Remote

To install the batteries, push the rear cover open in the direction of the arrow at the bottom of the illustration, and
then insert the batteries as shown in the figure. Make sure that the positive and negative ends are facing in the correct
direction. Close the rear cover as shown.
• Alkaline batteries are recommended for longer battery life.
When you turn on the Projector for the first time, the Samsung Smart Remote pairs
to the Projector automatically. If the Samsung Smart Remote does not pair to the
Projector automatically, point it at the remote control sensor of the Projector, and then
press and hold the buttons labelled
simultaneously for 3 seconds or more.
and as shown in the figure on the left
English - 11