6 OPTIONAL ACCESSORIES
5m (16 4ft) blowing and suction spiral sheath
High expansion foam adapter without coupling BSP M 1.5 " Supplied with 35m of
polyane plastic film sheath
"Rehab" mister - BSP F ¾" input
External fast charger
Lithium Li-Ion battery 82V / 5Ah
7 COMMISSIONING INSTRUCTIONS
The following checks must be carried out during the first start-up:
- On delivery, visually inspect B215Li NEO and its accessories to ensure there was no damage during transport.
- Do not try and use B215Li NEO if you notice any damage.
Contact LEADER immediately.
- If an abnormal noise occurs or the propeller gets stuck, stop and notify LEADER immediately.
- Ensure that each person responsible for the device/using this device has read the user instructions and safety guidelines.
8 IMPLEMENTATION OPERATIONS
The way the B215Li NEO fan is started depends on the terrain on which it is being used.
Freely downloadable interactive ventilation courses at www.leader.educexpert.com
1/ Control.
2/ Check.
3/ Place the B215Li NEO fan on a flat surface where there are no slippery products and which is clear of debris.
Make sure there is no obstacle between the fan and the opening for air entry.
➢
Precautions for use
NB: The ventilators operate on the high-speed entrained air principle.
These portable ventilators are designed to clear smoke and gas,
volatile or otherwise, by their blowing (or positive power) action,
in all types of premises where an exit has been prepared.
They are designed to be used between 2 m/6.6 ft and 6 m/19.7 ft
away from the opening concerned.
LEADER recommends that the minimum opening for escaping smoke
should be the same size as the entry opening: the ideal would be double
the size.
LEADER product only
17
Reference
Consult LEADER
Area without gravel / waste / R = 0.50 m = 1.6 ft