Tuner Setup; Setting Up Tv Channels; Scanning Channels Automatically; Setting Up Analog Channels Manually - Pioneer PDP-5016HD Manual De Instrucciones

08

Tuner Setup

Setting up TV channels

This section describes how to search and set up TV channels
that you can watch under the current conditions. Unless you set
up TV channels using Scan Channels, you may not be able to
tune in any channels.

Scanning Channels Automatically

Scan Channels automatically searches and sets up TV
channels.
1
Press the MENU button.
2 Press the c or d button to move to Tuner Setup, then
press the OK button.
Tuner Setup
Scan Channels
Scan Analog Channel
Scan Digital Channel
Edit Channel List
3
Select Scan Channels and press the OK button.
4
Select Analog Channel Band.
5
Press the [ or \ button to select the required signal
source (Air or Cable).
6 Press the c or d button to select Digital Channel Band.
7 Press the [ or \ button to select the required signal
source (Air or Cable).
8 Move to Start by pressing the c or d button and start the
search by pressing the OK button.
Scan Channels
ATV Found CH : 0 DTV Found CH : 0
Back / OK Stop
• Scanning starts. The scanned channels are
automatically stored in order. To stop scanning, press
the OK button.
9
When finished scanning, press the EXIT button.
• When using the Cable Converter, you may need to manually add
Cable Converter output channels.

Setting up Analog Channels Manually

This section describes how to manually set up Analog
channels.
1
Press the MENU button.
2 Press the c or d button to move to Tuner Setup, then
press the OK button.
24
En
70%
3
Press the c or d button to move to Scan Analog
Channel, then press the OK button.
Tuner Setup
Scan Channels
Scan Analog Channel
Scan Digital Channel
Edit Channel List
4 Move to Channel by pressing the c or d button and
select the channel number by pressing the [ or \
button.
Scan Analog Channel
Band
Channel
Name Channel
Fine Tune
Store
5
Press the c or d button to move to Store, then press the
OK button.
6 If you want to edit the channel name, press the c or d
button to move to Name Channel, then press the OK
button.
Scan Analog Channel
Band
Channel
Name Channel
Fine Tune
Store
7 Press the c or d button to select a letter (A~Z, a~z), a
number (0~9) or a symbol (space, {I}~! "#$%& ()*+,-./:;
<=>?@[\]^_`). Move to the previous or next letter by
pressing the [ or \ button.
8
When you have finished entering the channel name, press
the OK button.
9 Press the c or d button to move to Store, then press the
OK button.
10
If you want to adjust the tuning, press the c or d button
to move to Fine Tune, then press the [ or \ button to
obtain good picture and sound quality.
Scan Analog Channel
Band
Channel
Name Channel
Fine Tune
Store
11 Press the c or d button to move to Store, then press the
OK button.
12
Press the EXIT button.
Air
2
Air
0
Air
0