Bosch RA1181 Instrucciones De Funcionamiento Y Seguridad página 18

ATTACHING THE FENCE TO THE TABLE
(Fig. 12)
1. From underneath the table, slide two 1/4-20 x 1
carriage bolts (34) up through the slots in the
tabletop and the holes in the bottom of the fence.
Slide a washer (26) onto each bolt and loosely
attach a large clamping knob (14) onto each bolt.
2. Make sure that the fence assembly slides smoothly
from front to back.
NOTE: Use the scale on the tabletop as a guide
when aligning the fence for routing operations. Once
the fence is positioned and aligned correctly, tighten
the clamping knobs SECURELY.
Router Table Assembly
INSTALLING THE FENCE
FIG. 12
⁄
3 "
4
18
14
26
34