Sea gull lighting AMBIANCE 96620S Instrucciones De Montaje página 3

1E
TAB
On the low voltage side, press and hold one tab, then
9
insert a low voltage wire into the port. Release the tab
to secure the wire in place. Repeat for the remaining
wire.
1F
11
11
Select the desired location to mount the transformer
10
housing (not in contact with insulation and away from
oven or any other source of intense heat).
Secure the transformer to the mounting location by
11
screwing in the four mounting screws.
HIGH
VOLTAGE SIDE
LOW
VOLTAGE SIDE
9
LOW
VOLTAGE WIRES
11
MOUNTING
SCREW
7
11
For LX Track Systems
2A
CABLE
1
Press the LX powerfeed connector straight onto the
track until it snaps into place.
3
TRACK
LX POWERFEED
CONNECTOR