TACKLIFE RTD35ACL Manual Del Operador página 4

f) dress properly. do not wear loose clothing or jewellery. keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
g) if devices are provided for the connection of dust extraction and collection facilities, ensure these
are connected and properly used. Use of these devices can reduce dust-related hazards.
4) Power tool use and care
a) do not force the power tool. Use the correct power tool for your application. The correct power tool
will do the job better and safer at the rate for which it was designed.
b) do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
c) disconnect the plug from the power source and/or the battery pack from the power tool before
making any adjustments, changing accessories, or storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
d) store idle power tools out of the reach of children and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool. Power tools are dangerous in the hands of
untrained users.
e) maintain power tools. check for misalignment or binding of moving parts, breakage of parts and any
other condition that may affect the power tools operation. if damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained power tools.
f) keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g) use the power tool, accessories and tool bits etc. in accordance with these instructions and in the
manner intended for the particular type of power tool, taking into account the working conditions
and the work to be performed. Use of the power tool for operations different from those intended
could result in a hazardous situation.
5) Battery tool use and care
a) ensure the switch is in the off position before inserting battery pack. Inserting the battery pack into
power tools that have the switch on invites accidents.
b) recharge only with the charger specified by the manufacturer. A charger that is suitable for one
type of battery pack.
c) Use power tools only with specifically designated battery packs. Use of any other battery packs may
create a risk of injury and fire.
d) when battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails,
screw, or other small metal objects that can make a connection from one terminal to another. Shorting
the battery terminals together may cause burns or fire.
e) Under abusive conditions, liquid may be ejected from the battery; avoid contact, if contact accidentally
occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from
the battery may cause irritation or burns.
- 02 -