Wash & Care
For hygienic reasons, it is important to wash your Rinö
before and after each use. Please follow the steps for
the Rinö's QUICK wash.
Rinö's QUICK wash
1
Make sure that the upper and lower
covers are closed firmly before cleaning
the Rinö.
2
Remove the silicone tip.
3
Hold the mucus reservoir between
your thumb and your index finger.
4
Bend the mucus reservoir downwards
gently to remove it from
the suction tube.
P5
5
Remove the silicone rings from the suction
tube for cleaning. Note that the silicone
rings do not need to be cleaned every
time, clean after several uses.
6
Wash all parts in warm soapy water.
These parts can be sterilized in a steam
cleaner, in boiling water or with a UV
sterilizer (ex.: the bblüv Üvi sterilizer).
7
Make sure all the parts are dry before
reassembling them. Reassemble all parts
making sure they all fit tightly together
on the Rinö.
NOTE: If the accumulated volume of mucus is over the safe
mucus capacity during use of the Rinö or if you see mucus
dripping out of the air vent on the back side of the collar, please
follow the instructions for the Rinö's DEEP wash.
P6