Safety; Personnel Qualification; Skilled Personnel; Special Hazards - WIKA SA-11 Manual De Instrucciones

2. Safety

2.3 Compliance with EHEDG conformity
For an EHEDG-compliant connection, sealings in accordance with the current EHEDG policy document must be used.
Sealings for connections per ISO 2852, DIN 32676 and BS 4825 part 3 are, e.g., manufactured by Combifit
International B.V.
A manufacturer of sealings for connections per DIN 11851 is, e.g., Kieselmann GmbH.
A manufacturer of VARINLINE
A manufacturer of NEUMO BioConnect

2.4 Personnel qualification

WARNING!
Risk of injury should qualification be insufficient!
Improper handling can result in considerable injury and damage to property.
The activities described in these operating instructions may only be carried out by skilled personnel who
have the qualifications described below.

Skilled personnel

Skilled personnel are understood to be personnel who, based on their technical training, knowledge of measurement
and control technology and on their experience and knowledge of country-specific regulations, current standards and
directives, are capable of carrying out the work described and independently recognising potential hazards.
Special operating conditions require further appropriate knowledge, e.g. of aggressive media.

2.5 Special hazards

WARNING!
For hazardous media such as oxygen, acetylene, flammable or toxic gases or liquids, and refrigeration
plants, compressors, etc., in addition to all standard regulations, the appropriate existing codes or
regulations must also be followed.
WIKA operating instructions pressure transmitter, model SA-11
sealings is, e.g., GEA Tuchenhagen GmbH.
®
sealings is, e.g., NEUMO GmbH & Co. KG.
®
EN
7