Popcorn Maker - Taurus Group POP 'N' CORN Manuel De Instrucciones

English

Popcorn maker

POP 'N' CORN
DESCRIPTION
A Body
B Lid
C Popcorn shoot
D Corn container
E Measuring cup
F On/off switch
G Cord housing
USE AND CARE:
- Fully unroll the appliance's power cable before
each use.
- Do not move the appliance while in use.
- Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
- This appliance is for household use only, not
professional or industrial use.
- This appliance should be stored out of reach of
children and/or the disabled.
- Do not put the appliance away if it is still hot.
- Never leave the appliance unattended while in
use.
- NEVER USE BUTTER OR OIL IN THE CORN
CONTAINER
- Any misuse or failure to follow the instructions
for use renders the guarantee and the manu-
facturer's liability null and void.
INSTRUCTIONS FOR USE
BEFORE USE:
- Remove the appliance's protective film.
- Before using the product for the first time,
clean the parts that will come into contact with
food in the manner described in the cleaning
section.
USE:
- Unroll the cable completely before plugging it
in.
- Put lid on.
- Connect the appliance to the mains.
- Fill up the corn container using the measuring
cup. Use a maximum amount of one measuring
cup each time.
- Place the measuring cup on the lower part of
the lid in the place designed for this purpose.
- Place a bowl underneath the popcorn shoot.
- Turn the appliance on using the on/off switch.
- After 2 or 3 minutes, depending on the amount
added, the popcorn will be ready.
- If after 3 minutes, there is corn left in the pop-
corn maker, turn off the appliance, unplug and
remove corn that is left.
- Take caution with the popcorn maker body and
lid, as they have hot surfaces.
- NEVER USE SALT, SUGAR, BUTTER OR OIL
in the product. Always add after popcorn is
ready for eating.
- Once you have finished using the appliance:
- Unplug the appliance to the mains.
- Clean the appliance
CABLE HOUSING
- This appliance has a cable compartment situa-
ted on its underside.
CLEANING
- Disconnect the appliance from the mains and
let it cool before undertaking any cleaning task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Do not submerge the appliance in water or any
other liquid, or place it under a running tap.
- It is advisable to clean the appliance regularly
and remove any food remains.