Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Rear Panel
The rear panel of the Switch consists of 8 10/100/1000Mbps
RJ45 Ports and one power jack. All ports can work as the Uplink
port.

LED indicators

The LED indicators include Power LED and Link/Act LEDs. The
LED indicators are used for monitoring and troubleshooting of
the Switch. The following section shows the LED indicators for
the Switch along with an explanation of each indicator.
Power LED: This indicator will light up when the Switch
powers up. If the LED is not lit, please check the power
adapter and connection.
1000M LINK/ACT LEDs: These LEDs indicate
Link/Active status. One LED will light green when a
1000Mbps device is connected to the corresponding
port. It flashes when data is being transmitted or
received on the connection.
10/100M LINK/ACT LEDs: These LEDs indicate
Link/Active status. One LED will light green when a
10Mbps or 100Mbps device is connected to the
corresponding port. It flashes when data is being
transmitted or received on the connection.
ENGLISH-4

Publicidad

Tabla de contenido
loading

Tabla de contenido