Stand Installa�On - LC-POWER LC-M44-DFHD-120 Manual Del Usuario

5. Stand lnstalla�on
1. Take out the two main parts of the stand. Then use the screwdriver and
the NO.1 screws to fasten base to the stem.
2. Take out the monitor and put it on the flat foam, insert the stand on
the back of monitor.
3. Use both hands to place the assembled monitor on a flat desk.
Make sure the monitor is laid on a flat surface before removing the stand.
Stem
PM5*15 Screw Bolts X3
Base
Quick release bu�on
Eng-4