Taurus ROBOT 500 Manual De Instrucciones página 11

Ocultar thumbs Ver también para ROBOT 500:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
the on/off button.
- Unplug the appliance from the mains.
- Put the cable back in the cable housing.
- Clean the appliance.
Accessories:
Blender foot accessory (Fig. 2):
- This accessory is used for making sauces,
soups, mayonnaise, milkshakes, baby food ...
- Attach the stick to motor body and turn in the
direction of the arrow (Fig. 2).
- Put the food to be prepared in the jar and switch
the appliance on.
- For further cleaning, detach and remove the
stick by turning in the opposite direction of the
arrow (Fig. 2).
Chopping accessory (fig. 3):
- This accessory is used to chop vegetables, nuts,
meat...
- Fit the adapter fitting to the motor unit by turning
it in the direction of the arrow. (Fig. 3.1)
- Fit the unit to the lid until hear the click. (Fig.
3.2)
- Put the food to be prepared in the chopping
container and attach the lid firmly. (Fig. 3.3)
- Start the appliance. Warning: do not start the
appliance if the entire unit is not properly seated
and fitted. (Fig. 3.4)
- Stop the appliance when the food reaches the
desired texture.
- Detach the unit from the lid and release the
adapter fitting. (Fig. 3.5)
Whisk accessory (Fig. 4):
- This accessory is used to whip cream, beat egg
whites...
- Insert the whisk into the motor unit (Fig. 4.1). Fit
the adapter fitting to the motor unit by turning it
in the direction of the arrow (Fig. 4.1).
- Put the food into a large receptacle and switch
the appliance on (Fig. 4.2). For best results, turn
the whisk clockwise.
- Remove the whisk accessory and release the
adapter fitting (Fig. 4.3)
- Note 2: To free the whisk (F) from the adapter
fitting (G), pull the ring on the whisk.
Cleaning
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
- During the cleaning process, take special care
with the blades, as they are very sharp.
- It is advisable to clean the appliance regularly
and remove any food remains.
- If the appliance is not in good condition of clean-
liness, its surface may degrade and inexorably
affect the duration of the appliance's useful life
and could become unsafe to use.
- The appliance is suitable for cleaning in hot
soapy water or in a dishwasher (using a soft
cleaning program).
- The following pieces may be washed in a dis-
hwasher (using a soft cleaning program):
- Blender foot
- Measuring cup
- Goblet
- Whisk
- The draining/drying position of the articles
washable in the dishwasher or in the sink must
allow the water to drain away easily (Fig 5).
- Then dry all parts before its assembly and storage.

Hide quick links:

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Robot 500 inoxRobot 500 plus inoxRobot unic 500 plus inox

Tabla de contenido