Ceiling Installation - EGi 06701 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

06701
5" CEILING LOUDSPEAKER
SPEAKER ASSEMBLY
1 Firstly, separate the white ring from the red cover. To do this, pull the ring while holding the cover firmly.
2 Release one of the metal spring that holds the ring to the cover. Keep the other metal spring fastened in such a way
that the ring is attached to the cover by it.
3 Loosen the wing nuts of the inside of the cover and rotate the tabs in order to maintain the teeth facing down.
4 Pass the speaker cable through the cable gland.
5 Insert the speaker into the hole in the ceiling and adjust the tabs against the false ceiling panel using the wing nuts.
6 Once the cover is firmly fixed to the ceiling, connect the cables to the speaker terminal block, as shown in electric
scheme.
7 Finally insert the metal spring in its correct position and push the ring up to close the speaker.

CEILING INSTALLATION

1
3
2
4
- 11 -

Publicidad

Tabla de contenido
loading

Productos relacionados para EGi 06701

Tabla de contenido