Set Unit Upright; Positioning A Dehumidifier; Set Up Drain Hose - SERVPRO Revolution LGR Manual Del Propietário

dustries, Inc. RMA/Warranty program, proof of purchase
and equipment warranty records are added to the data-
base. This service saves Franchisees time and re-
sources spent attempting to determine warranty cover-
age for equipment.
After receipt of the completed Warranty/RMA Request
Form, an RMA Coordinator will check warranty status on
any listed equipment prior to submitting the claim infor-
mation to the vendor(s).
If the unit is covered under warranty, the RMA Coordina-
tor will communicate the repair and return process.
If equipment is not covered under warranty, the ven-
dor(s) will provide a competitive repair estimate prior to
completing any non-warranty repairs. The RMA Coordi-
nator will present repair options and receive Franchise
approval prior to authorizing non-warranty repairs.
The SERVPRO RMA Department is here to serve you!
INTRODUCTION
NOTICE: Some assembly required before use. Follow
instructions under "Controls and Operating Instructions,"
left.
The Revolution Dehumidifier reduces humidity in en-
closed structural environments by removing water vapor
from the air. With proper use, the Revolution can help to
dry out damp structural materials, insulation, and con-
tents, and maintain a healthy level of humidity. Using the
Revolution may also prevent secondary damage caused
by high humidity.
How the Revolution works
The Revolution refrigerant dehumidifier uses a fan to
draw moist air in and condenses it into water that col-
lects in a tray and is automatically pumped out through a
drain hose. The unit can be set to operate continuously
or the user may select Humidistat Mode. In Humidistat
Mode, the Revolution will turn on and off automatically to
maintain the inlet humidity level the user has selected.
Features:
• Industrial-quality dehumidifier removes up to 134
pints (63 liters) of water per day.
• Automatic humidistat to set and maintain desired
humidity level.
• Recessed feet indents ensure secure stacking of up
to three Revolution units for storage and transport.
• Designed for convenient stacking and transporting
on a handtruck.
• Recessed handles for easy positioning in confined
spaces.
• Quiet operation and low power consumption.
07-01897D #613 (F413-SP) Warranty 07-00420
CONTROLS AND OPERATING IN-
STRUCTIONS

Set unit upright

NOTICE: Always store, transport, and use the unit in
a horizontal position. If the unit is ever placed in a
vertical position, return it to the horizontal position
and let it stand for at least 30 minutes before turning
it on.

Positioning a Dehumidifier

For best results, operate your dehumidifiers in an en-
closed area. Close all doors and windows that open to
the outside to maximize water removal efficiency. Place
your dehumidifier away from obstructions, and keep it
away from anything that could block airflow into and out
of the unit. For more information about creating an opti-
mum drying environment, contact Dri-Eaz at
800-932-3030.

Set up drain hose

The Revolution condensate pump connects to a plastic
drainage hose. This hose is equipped with a quick-
connect fitting for quick attachment to the provided 40 ft.
(12 m) drain hose. Unwrap the entire hose and place the
unattached end in a sink, drain, bucket or outdoors –
anywhere that water can drain out safely. If you use a
bucket or other container for water collection, check it
regularly to prevent overflows.
Fig. A: Parts Identification
Air inlet
Cord and
hose storage
wraps.
Condensate
drain quick-
connect
2
Carry handles
Control
panel
Air outlet
Power
socket
Temp/RH
sensor
Remove/Insert
air filter here.
Dri-Eaz Products, Inc.