Taurus Alpatec BABEL Manuel De Instrucciones página 6

English
Tower Fan
BABEL
DESCRIPTION
A Speed selector
B Oscillation
C Timer
D Air outlet
E Horizontal base
If the model of your appliance does not have the
accessories described above, they can also be
bought separately from the Technical Assistance
Service.
USE AND CARE:
- Fully extend the appliance's power cable before
each use.
- Do not use the appliance if the on/off switch
does not work.
- Do not turn the appliance over while it is in use
or connected to the mains.
- Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
- Store this appliance out of reach of children
and/or persons with physical, sensory or
reduced mental or lack of experience and
knowledge.
- Never leave the appliance connected and un-
attended if is not in use. This saves energy and
prolongs the life of the appliance.
INSTALLATION
- Be sure to remove all packaging material from
inside the appliance.
- Ensure that the fan is switched off from the
supply mains before start any installation or
assembly operation.
- Ensure that the appliance is level with respect
to the floor.
- The plug must be easily accessible so it can be
disconnected in an emergency.
ASSEMBLING THE BASE FOR BABEL:
- Join the horizontal base parts (Fig.1).
- Fit the base with the body and secure it with
the screws provided.
- Stand the appliance up again so as to check
that the base works properly.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all products' packaging has
been removed.
- Prepare the appliance according to the function
you wish to use:
USE:
- Extend the cable completely before plugging
it in.
- Connect the appliance to the mains.
- Turn the appliance on, by using the speed
buttons (A).
- Select the desired speed.
TIMER FUNCTION:
- The appliance's operating time can be con-
trolled.
- To program the operating time simply select it
using the (C) button.
- After the selected time the appliance will switch
off automatically.
OSCILLATION FUNCTION:
- The oscillation function makes it possible to
direct the flow from the apparatus so that it
automatically alternates over a range of 75º.
- To activate this function, press the (B) button.
- To deactivate this function, follow the proce-
dure for switching it on in reverse.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Stop the appliance using the 0 button.
- Unplug the appliance from the mains.
- Clean the appliance.
CARRY HANDLE/S:
- This appliance has a handle on the back to
make it easy and convenient to transport
(Fig.2).
SAFETY THERMAL PROTECTOR:
- The appliance has a safety device, which pro-
tects the appliance from overheating.