6 It is not permitted to open the product yourself or to have it opened, neither is it
permitted to repair the product yourself or to have it repaired. This will void the
warranties. Let any maintenance be carried out by certified maintenance personnel.
• Clean the outside of the appliance with a soft cloth. When the appliance is very dirty,
dampen the cloth slightly with water and a neutral solution.
7.1 Draining the appliance
See image 3.
Draining is only needed in dry mode.
5
The appliance shuts off automatically when the reservoir is full.
5
You can also drain the appliance automatically by attaching a drain hose to the drain.
5
Place a drain reservoir on a lower level than the drain.
1. Carefully place the appliance above a sink.
2. Open the drain.
3. When the appliance is drained, close the drain.
7.2 Cleaning the filters
6 Do not touch the evaporation filter with bare hands.
1. Remove both filters from the appliance.
2. Clean the filter with a vacuum cleaner.
3. Rinse water through the filter in opposite direction of the airflow.
4. Let the filters completely dry before reïnstalling
8
TROUBLESHOOTING
Problem
The appliance does not
switch on.
Possible cause
The power cable is not
connected correctly.
The water level in the
reservoir is too high. The
water level indicator lights
up.
The room temperature
exceeds the working range.
9
Solution
Reconnect the power cable.
Empty the reservoir.
Make sure the room
temperature is between 5
- 35 °C.