HOW TO USE SINGLE EARBUD:
Power on
Press the multifunction button (1) until you hear "power on" and see the indicator (3)
flashes red and blue for pairing.
Power off
Press the multifunction button (1) until you see the indicator (3) turns red again and
hear "Power off".
Pairing: First time to use
In power off status: press the multifunction button (1) until the indicator light (3)
flashes red and blue. Turn on your BT setting on your cell phone and search
"Swiss Peak bottle earbuds" and connect. It will pair automatically.
Once the earbud(s) are successfully paired and connected with your mobile phone,
you can use them to make a call and listen music.
- Answer call/End call: Press the multifunction button (1) once to answer the
incoming call. Press the multifunction button (1) once again to end a call.
- Reject call: Press and hold multifunction button (1) for around a few seconds
(around 2 seconds) to reject the incoming call.
- Redial: Double press on the multifunction button (1) to redial the last number you
called on your phone.
- Music: Press multifunction button (1) to pause/play music.
HOW TO USE STEREO EARBUDS OPERATION:
Power on
Press the multifunction button (1) until you hear "power on"
Power off: both earbuds
Press the multifunction button (1) until you see the indicator (3) turns red again
and hear "Power off". Note: powering off one earbud will automatically power
off the other.
Pairing: First time to use
1. In power off status: press and hold the multifunction buttons (1) of two earbuds
at the same time until the red and blue LED indicators (3) will flash alternately, put
two earbuds close to each other, double press the button of one earbuds that you
want it to be Primary.
2. Two earbuds will pair to each other automatically, after then one earbud's blue
LED indicator (3) flashes slowly, another earbud LED (3) flashes red and blue
alternately, at this time you can see only one "Swiss Peak bottle earbuds" in
your phone.
SEARCH AND CONNECTION WHEN USING STEREO EARBUDS:
When just one earbud flashes red and blue alternately, please wait until only one
"Swiss Peak bottle earbuds" shows in your phone, then click to connect. It will
pair automatically.
Notice: Please do not click "Swiss Peak bottle earbuds" to connect before two
earbuds connected to each other. Otherwise the stereo function is not available.
Pairing successful:
When both earbuds are paired to your device successfully, both will show slowly
blinking blue LED indicators (3).
Calling:
Only the Primary earbud can operate phone call functions.
Answer/End Call: Press the multifunction button (1) once to answer. Press again the
multifunction button (1) to end call.
Reject call: Press and hold the multifunction button (1) for few seconds to reject
the incoming call.
Redial: Double press the multifunction button (1) to redial the last number you
dialed.
Play music:
Play/Pause: Press the multifunction button (1) on the Primary earbud to play and
pause music.
Next Song: Press the multifunction button (1) on the Secondary earbud to play
next song.