Northern Diver SRE ELEV8 Manual página 2

NORTHERN DIVER HELMET MANUAL
Thank you for purchasing this Northern Diver Helmet Visor. To help ensure your future
safety, do not use this product before reading this manual. It is important to fully
understand its proper handling for safe usage.
Copyright notice: This owners manual is copyrighted, all rights reserved. It may not, in
whole or in part, be copied, photocopied, reproduced, translated, or reduced to any
electronic medium or machine-readable form without prior consent in writing from Northern
Diver (International) Ltd.
For the latest information about all Northern Diver Specialist Rescue Equipment please visit
www.ndiver-rescue.com
NOTE: Read the instructions carefully before using the visor; failure to follow the advice
given could reduce the level of safety provided by the visor. The manufacturer and/or
distributor will not accept any responsibility in the event of accidents leading to
injury or even death due to improper use of the visor. This visor must be used exclusively
for the purposes for which it has been certified. This product has passed the CE certificate
for use with safety helmets for sports activities, for fighting forest fires, for industrial
purposes, jobs at high altitude and emergency health and first aid services. It has been
approved according to EN166 and complies with the requirements of flame resistance and
resistance to chemical agents in accordance with EN 14458.
EN 166 performance indexes:
• Optical class: 2
• Mechanical resistance: B
• Electrical resistance: 8
• Resistance to the penetration of solid hot substances: 9
• Resistance to Fine Particle Deterioration: K
• Resistance to fogging: N
EN 14458 performance indexes
• Flame resistance: 15"
• Resistance to chemical agents: C
The visor that is the subject of this manual is a Personal Protection Device of the 2rd
category and as such, has undergone CE certification procedure in accordance with article
10 of the European Directive 89/686/EC and subsequent amendments in directives 93/95
EC, 93/68 EC and 96/58 EC. The EC certification procedure was carried out by the notified
body n. 0497, CSI S.p.A. Viale Lombardia, 20 – 20021 Bollate (Mi) – Italy.
INSTRUCTIONS FOR USE
As a protective measure, the visor must be worn at all times during work and sports
activities. For adequate protection, the visor must be fitted correctly to the helmet to offer
maximum safety. The visor must be adjusted to fit the user and it must be positioned in
such a way that the rubber trim rests on the user's nose to minimise the space for the
intrusion of external agents that could damage the eyes.
Northern Diver VISOR Manual | East Quarry Appley Lane North, Appley Bridge, Wigan, WN6 9AE, UK