Technical Data; Accessories; Assembly & Operation; Intended Use - Hyper Tough HT19-401-003-21 Manual Del Operador

Rated Voltage
Air flow
Rated power
No load speed
Blower speed
Speed control
Machine weight
Protection degree
Lower blower tube
Upper blower tube
We recommend that you purchase your accessories from the same store that sold you the tool. Refer to the
accessory packaging for further details. Store personnel can assist you and offer advice.
OPERATION

INTENDED USE:

The blower is intended for residential use only. Use the blower outdoors to move yard debris as
needed.
WARNING: To avoid injury from unexpected starting or electrical shock during assembly or
adjustment, do not plug the power cord into a source of power.
ASSEMBLY
1. ASSEMBLING AND DISASSEMBLING THE BLOWER TUBE (SEE A & B)
Note: Before assembling and disassembling the Blower Tube, be sure the on/off switch is in ''0'' Off position
and the plug is removed.
Slide the lower blower tube to upper blower tube and slide blower tube to the motor housing(See A). Ensure
the hole in the tube matches up with the tube release button in the housing.
Press the tube release button, so that you can separate the tube (See B). Do not try to separate the tubes by
force or by using tools.
2. ATTACHING THE EXTENSION CORD (SEE C)

TECHNICAL DATA

ACCESSORIES

ASSEMBLY & OPERATION
9
120V~60Hz
450CFM(12.78m /min)
3
7.5A
25000/min
100mph (160km/h)
2- Speed
6.6lbs (3kg)
/ll
1
1