IWS 3865 Instrucciones De Manejo página 25

— 2 5 —
u s I n g T h e D o u B l e c h r o n o g r a p h
Start: To start the chronograph, press the start/stop button.
Intermediate timing: Actuate the split-seconds-hand button; this will stop the split-
seconds hand, but it will not influence time measurement. You have now recorded an
intermediate time while the standard stopwatch continues to run. By actuating the
split-seconds-hand button once again, you can cause the split-seconds hand to catch
up with the chronograph seconds hand again, and your chronograph is then ready for
the next intermediate time stop.
Stop: To stop the chronograph, press the start/stop button again. The chronograph
seconds hand and the split-seconds hand stop simultaneously.
Reset: Press the reset button. This will reset all the chronograph hands to zero. The
separately stopped split-seconds hand is not automatically reset, but must be reset
by pressing the split-seconds-hand button again.
Aggregate time recording: You can add the stop times together by pressing the
start/stop button again after the first measurement instead of the reset button.
Suggestion: In order to avoid placing unnecessary strain on the movement, the split-
seconds hand should not be left in a stopped position for long periods. It is essentially
only used for the measurement of intermediate times or for recording a second finish
time, and should be resynchronized with the chronograph seconds hand once again
after doing so.
I n g e n I e u r D o u B l e c h r o n o g r a p h T I T a n I u M