Fulgor Milano FPH 10014 TC BK Manual De Instrucciones página 15

INSTALLATION
The hood must be combined with linear hobs (induction or glass-ceramic), the hood and cooking hob must
match perfectly. Combined operation with gas hobs is not permissible and explicitly prohibited.
Once the installation is complete, the electrical components (cables, connectors, motor and control box)
will no longer be accessible to the user. To allow access to those parts place a removable panel secured
with screws.
The hood can be used for both filtering and suction.
When the filtering function is operating, i.e. with air recycle, carbon filters must be used (refer to the par-
agraph on CARBON FILTERS).
When the suction function is operating, i.e. exhausting the filtered air on the outside, a suitable compensa-
tion system must be used according to current standards in force. The diameter of the fume exhaust pipe
must be the same or greater than the diameter of the hood pipe union.
There must be sufficient ventilation in the room where the hood is installed, to allow the simultaneous use
of other appliances that use gas or other fuel.
ASSEMBLY INSTRUCTIONS
The hood must be combined with linear hobs (induction or glass-ceramic), the hood and cooking hob must
match perfectly. Combined operation with gas hobs is not permissible and explicitly prohibited.
EN - 12