8�3 Switching The Device On/Selecting The Vibration Level; 8�4 Examples Of Use - Beurer MG180 Instrucciones De Uso

8.3 Switching the device on/selecting the vibration level
Note
The Deep Tissue Massager comes with an automatic switch-off function� This means that the
Deep Tissue Massager automatically switches off after a period of use of 15 minutes�
1� Slide the ON/OFF switch on the bottom of the handle to the "ON" position�
2� To now switch on the Deep Tissue Massager, press and hold the ON/OFF button for 2 sec-
onds� The battery state indicator begins to light up and the massage starts�
3� To switch between the four vibration settings, briefly press the ON/OFF button� If the device
is in the fourth vibration setting and you press the ON/OFF button again, the Deep Tissue
Massager will switch off� You can also switch off the Deep Tissue Massager directly whilst it is
in use by pressing and holding the ON/OFF button for 2 seconds� The battery state indicator
goes out and the massage stops�
4� Once the treatment is complete, slide the ON/OFF switch on the bottom of the handle to the
"OFF" position�
8.4 Examples of use
Lower legs, thighs and calves
Shoulders, arms and back
Note
Make sure that the massager is not rolled directly over your bones�
24