Warning:
To reduce the risk of injury, user must read and understand
the operator's manual for their pressure washer before
using this accessory. Fits most pressure washers. Ensure
compatibility and proper fit before using this accessory.
Wear eye protection with side shields marked to comply
with ANSI Z87.1 Risk of fluid injections; do not point at
people, pets, electrical devices, or the unit itself. Turn off
the pressure washer before changing or adjusting acces-
sories. For cold water use only. Save these instructions.
Refer to them frequently and use them to instruct other
users. If you loan someone this product, loan them these
instructions also.
product speciFications
Connection .......................1/4 in. Quick Connect Plug Inlet
Maximum Pressure .......................................up to 4000 psi
Maximum Water Flow ...............................................4 GPM
Maximum Water Temperature ................................... 104°F
applications
You may use this product for the purpose listed below:
n Applying detergent to remove dirt and mold from decks,
cement patios, and house siding, cars, boats, motor-
cycles, outdoor furniture, and grills
installing the FoamBlaster
attachment
See Figures 1 - 2.
The G-Clean High Pressure FoamBlaster
you to use G-Clean foaming detergent while using your pres-
sure washer for high-pressure cleaning.
n Put G-Clean concentrated foaming detergent in the
detergent container.
high pressure
FoamBlaster
agpWF04
™
Attachment allows
™
attachment
™
attachment
heaD
n Install the attachment head and tighten securely.
note: Use only G-Clean concentrated foaming detergent
in the attachment. Any other solutions may damage the
attachment.
n Install the attachment on the end of your pressure wash-
er's spray wand just as you would any type of nozzle.
Detergent
container
Fig. 1
pressure
washer
spray
wanD
Fig. 2