Worx Nitro LEAFJET WG585 Manual Del Usuario página 10

Battery indicator light
See details in BATTERY STATUS part
IMPORTANT:
When only one light is illuminated,
your battery is overly discharged,
even though the machine may still be
capable to work. Continuing to operate
your machine with the battery in this
discharged condition may reduce the life
and performance of your battery.
When no light is illuminated, at least one
battery is not fully installed or battery
may be defective, please double check the
batteries are fully seated into position.
ASSEMBLY
Air speed mode
NOTE: The blower is in the air speed mode for
default assembly.
NOTE: The blower has two working modes: air
speed mode and air volume mode. To change
modes, depress the nozzle release button
and slide backward for air speed mode. Slide
forward for air volume mode.
Choose a suitable mode according to your
work:
- AIR SPEED MODE offers a high-speed,
10
concentrated airflow for sweeping
smaller areas, clearing debris out of
grass, or dislodging heavy or wet leaves.
- AIR VOLUME MODE offers a high-volume
of mass airflow to cover a larger area or
on hard surfaces.
Air volume mode
OPERATION
Starting & Stopping
WARNING! The tool runs for a few
seconds after it has been switched off.
Let the motor come to a complete standstill
before setting the tool down.
40V Cordless Blower
Adjusting the blowing speed / air volume with
2-speed switch
USER TIPS
- Hold the blower tube approximately 8"
above the ground when operating the
tool.
See Fig. D Use a sweeping motion from side to side.
- After blowing the debris/leaves into a pile,
it is easy to dispose of the pile.
Caution!
- Do not blow hard objects such as
nails, bolts, or rocks.
- Do not operate the blower near
bystanders or pets.
- Use extra care when cleaning debris
from stairs or other tight areas.
- Wear safety goggles or other suitable
eye protection, long pants, and shoes.
Turbo button for power boosting
NOTE:
• Turbo button for power boosting can
increase air flow significantly, and it
can be used for clearing heavy or wet
debris.
See Fig. E
• First switch on the blower and select
a speed control (speed I or II), then
depress the turbo button and hold it.
Release the Turbo button, the blower will
return to the previously selected speed.
BATTERY STATUS (See Fig. D)
• Before starting or after use, press the button beside
the power indicator light on the machine to check the
battery capacity.
See Fig.
• During operation, the battery capacity will be indicated
F, G
automatically by the battery power indicator. The
indicator constantly senses and displays the battery
condition as follows.
• For the machine with 2 battery packs with different
power, the power indicator light displays the battery
condition with the lower one of the two batteries.
See Fig. H
Battery
indicator light
status
Five green lights
(
illuminated.
Two, three or four
green lights are
illuminated.
Battery condition
The two batteries are in a highly
) are
charged condition.
The two batteries have a
remaining charge. The more lights
are illuminated, the more battery
capacity.
See Fig.
I1, I2
See Fig. J
EN